If you have servers or desktops, running Ubuntu Linux (or a derivative), you might find yourself needing to add extra drives for storage, backups, or any number of reasons. Sure you could plug that.. Automatically mount NTFS drive when I . I have a second, internal hard drive for the purpose of backup. I use Back in Time to backup every hour onto this second drive. The problem is that, unlike Windows, Ubuntu fails to see the second drive on boot up. I have to manually mount it which is a pain for me and a real pain for my non technical wife. Is there any simple way to automate this process? In fact, why does Ubuntu not see it and mount it automatically, like Windows How to automount hard disks on boot in Ubuntu Step 1) Go to Activities and launch Disks. Launching Disks from App Menu Step 2) Select the hard disk or the partition in the left pane and then click on the Additional partition options,... Step 3) Select Edit Mount Options. Partition Settings. If you are using Linux and have multiple hard drives in your system, you may find that the system does not auto-mount the secondary hard drive when you start up your computer. You're probably mounting it manually with your file manager (or even a terminal command), and this isn't the best way to go about it A device name like /dev/sdb1 is based on where your physical drive is plugged in and the order the drives were made available to the computer, so if your computer changes the same command could mount a different partition. It's possible for this to happen just from a software upgrade. The solution is to use a UUID. A UUID is a globally unique name for the partition. A UUID will remain the same if you put an internal disk into an external USB caddy, or change the name of the partition
Is there a way to set it so that that second hard drive is always mounted and mounted at boot just as the primary hard drive with the OS is always mounted? I'm posting my fstab entry in case that helps. /dev/hda1 / reiserfs acl,user_xattr 1 1 /dev/hdb1 /data1 auto noauto,user 0 0 /dev/hda5 swap swap pri=42 0 0 devpts /dev/pts devpts mode=0620. How to configure a secondary hard disk to auto mount In Linux Mint I have a brand new 4-TB harddisk to add to my computer recently. So I need to mount it in Linux. (Sik-Ho Tsang @ Medium) To do this, I need to do the following: A. Partitioning Using Parted (for > 2GB Harddisk) (New) (Updated on 18 Jan 2020) B. Formatting; C. Mounting (including auto mount after reboot) D. Checking whether the hard drive is mounte
My machine has a secondary (NTFS-formatted) internal hard disk drive containing most of my personal files and data. I wish to auto-mount this drive under my user HOME. However, during installation of Ubuntu (17.10), I chose to create a separate /home partition and apply the default (ecryptfs) encryption How to Mount an Additional Hard drive in Linux - Duration: 16:23. AJ Reissig 18,890 views. 16:23. Create shared folder to VirtualBox, share between guest Ubuntu and host Windows - Duration: 4:36.. 3. Unmounting the Drive. When you are finished with the device, don't forget to unmount the drive before disconnecting it. Assuming /dev/sdb1 is mounted at /media/external, you can either unmount using the device or the mount point: $ sudo umount /dev/sdb1. or: $ sudo umount /media/external Automount a Drive
I'm using Ubuntu 14.04.3 LTS on a dell Precision laptop and I can't seem to get my second hard drive mounted with it. I've tried editing the fstab with the apropriate entry and using the partprobe command to enable the change, but it won't mount as read and write. Also, when I turned on my.. Auto-mounting (Ubuntu Server) By default, disk drives do not auto-mount in Ubuntu Server Edition. If you are looking for a lightweight solution that does not depend on HAL/DBUS, you can install usbmount Automount 2nd Drive in Gnome The only thing that bugs me is that I have to manually mount it whenever I want to use it. Gnome has a CD properties preference that allows you to set actions when a CD is inserted, but it looks like these properties are only applicable to the first drive I aleady had
Das Programm automount¶ Wenn das Programm autofs gestartet wird, startet dieses gemäß den in den in den Map-Dateien vorliegenden Einträgen für jede dort eingetragene Partition eine Instanz des Programms automount als Daemon, der diese bei Bedarf ein- und wieder aushängt. Die Funktion dieser Dämonen wird vom Programm autofs gesteuert Does automount have an advantage over hard mount? | Post 18579 by 98_1LE on Saturday 30th of March 2002 11:19:07 PM. The UNIX and Linux Forums. Forums. Man. Search. Today's Posts. Quick Links Full Discussion: Does automount have an advantage over hard mount? Top Forums.
Enable Automount using DiskPart > automount Command 1 Open an elevated command prompt. 2 Type diskpart into the elevated command prompt, and press Enter. (see screenshot below) 3 Type automount enable into the elevated command prompt, and press Enter There are several ways to list all the hard drives present in a system through Linux command lines. Keep in mind a hard drive could be physically connected, virtually connected or even emulated (for example: when you use storage devices such as EMC, Sun or IBM).. Here are some different commands which can list the hard drives, keep in mind there are others but these are probably the most. . I want to find a conventional general approach to it Click the gear icon (under Volumes), select Format Partition, make your selections (Quick or Slow Erase, file system type), name the drive, and click Format. When prompted, click Format a second.. I have an extra hard drive which I access regularly in Ubuntu, and I have a link from my home folder to a folder on this drive. However, this link doesn't work when I first log in because the hard drive hasn't been mounted (or something, I presume). If I browse to the hard drive by going to Computer and selecting the hard disk, then the link because usable for the rest of my session. However.
Go binary that allows you to mount hard drives on a Linux host - mvisonneau/automount If you still want to automount to a target non-empty directory and want to have the original files available even after the dynamically loaded directories are mounted, you can use autofs to mount them to another directory (e.g. /var/autofs/net) and create soft links I found a combination of systemd options (on the ArchWiki ) that can be used in the /etc/fstab when mounting storage devices --be they internal, external, or network shares.. The magic (to me) that these mount options bring is that if a network share or an external drive that is being called via /etc/fstab is not present, they save your machine from hanging for a minute or two during the boot. mounting second hard drive. General support questions. 8 posts • Page 1 of 1. hoodcanaljim Posts: 308 Joined: Sun Feb 05, 2006 5:49 pm. mounting second hard drive. Post by hoodcanaljim » Fri Sep 30, 2016 8:50 pm Hi I have a computer that has centos7 on one hard drive and LinuxCNC on the other. LinuxCNC is using debian for its operation system and I would like to be able to access its files.
How to Mount External Devices. RELATED: Everything You Can Do With Windows 10's New Bash Shell The Windows Subsystem for Linux still automatically mounts fixed NTFS drives. So, if you have an internal C: drive and D: drive, you'll see them at /mnt/c and /mnt/d in the Linux environment.. DrvFs now allows you to mount external drives like USB sticks, CDs, and DVDs Hardware. Users. Moderation. Chat Room. Beta Testing; ISO Images. Teams. Editing fstab to automount partitions at startup. jahid_0903014: 6 years ago 8 auto mounting partitions is very easy in linuxmint with the disk utility which have a nice gui explaining everyting. but now i am going to show you a staright forward process of automonting partitions by editing /etc/fstab file. this tutorial. Step 2: Check available additional drivers. Open the 'Additional Drivers' tab. Here you will be able to see all the devices you can install drivers for. As shown in the image below, in case of other drivers like wireless drivers, you will get the option to either use the driver or to not use the device at all
We are going to mount this nfs share on CentOS 7 & Ubuntu Linux using autofs. Steps to mount nfs share using Autofs in CentOS 7 Step:1 Install autofs package. Install the autofs package using below yum command if it is not installed. [[email protected] ~]# rpm -q autofs package autofs is not installed [[email protected] ~]# yum install autof You can also use GParted to resize existing partitions, allowing you to create a second partition from your drive's free space. Steps . Method 1 of 2: Performing a Quick Format. 1. Open the Disks program. You can quickly find this by opening the Dash and typing disks. This will display all of your connected drives on the left side of the window. 2. Select the drive you want to format. All of. That's because these distros automount the drive for you the moment you insert it. So if you are using a popular general-purpose Linux distro, execute the below command to unmount your drive first after you insert it: sudo umount /dev/sdb. Then proceed on below to follow the procedure for mounting the USB drive. How to mount using termina When AutoMount is turned on, and a new hard disk is detected, AutoMount automatically tries to assign a drive letter and mount the disk. However, you may want to turn off Automount feature in some situations. For example, it is suggested to turn off Automount option on systems that have complex storage configurations, such as Storage Area Networks (SANs). On systems where drives are exposed to. The drive is a USB hard drive, and it's not guaranteed to be plugged in. If the drive isn't present when the computer boots, systemd times out on waiting for filesystem. I thought that errors=continue fixed this, but it's not even documented in the arch wiki on fstab. I know I could set the drive to noauto, but
Arch Linux. Home; Packages; Forums; Wiki; Bugs; Security; AUR; Download; Index; Rules; Search; Register; Login ; You are not logged in. Topics: Active | Unanswered; Index » Applications & Desktop Environments » i3 window manger & automount external hard disk / usb drive; Pages: 1 #1 2013-10-19 16:51:21. epic Member Registered: 2013-09-14 Posts: 6. i3 window manger & automount external hard. Detecting USB hard drive After you plug in your USB device to your USB port, Linux system adds a new block device into /dev/ directory. At this stage, you are not able to use this device as the USB filesystem needs to be mouted before you can retrieve or store any data In this article, we will discuss how to mount a USB drive in a Debian OS in case it is not detected by the system automatically. Most Linux distributions are configured to automatically mount USB devices as soon as they are inserted into the USB ports. However, in some cases, you are still required to mount the USB drives manually in order to access them Linux Mint Forums. Welcome to the Linux Mint forums! Skip to content. Quick links. FAQ; Board index. Debian Edition Support. LMDE Forums. LMDE Archive. xfce automount second hard drive on boot. Archived topics about LMDE 1 and LMDE 2. Forum rules LMDE 2 has reached end of support as of 1-1-2019 . 2 posts • Page 1 of 1. CapitalG Level 3 Posts: 101 Joined: Wed Sep 21, 2011 9:02 am. xfce.
If you have a second hard drive or removable media such as a flash drive, you can try accessing them through the /mnt directory as well, obviously by appending the appropriate drive letter to /mnt/ If you can't access your drives/media that way, you'll just need to mount them first, which Windows has made very simple in WSL. In this example, we'll mount and access drive D: in Ubuntu on. There are few important factors which are involved in learning how to mount USB drive with Linux machine. Following are the step by step instructions to understand further - Step 1: Plug-in USB drive to your PC. Step 2 - Detecting USB Drive. After you plug in your USB device to your Linux system USB port, It will add new block device into /dev/ directory. To verify it, use the following. . I eventually wrote a script that lived in /etc/rc.local, and that ran the cryptsetup luksOpen command manually upon boot. That worked pretty well until the system crashed (for another reason), and now the USB drive seems to be shot. I'm guessing the encrypted partition needed to be.
Repeat these steps to automount other drives (or additional partitions within a drive) as needed. Top of page. Controlling Access to Mounted Drives. Usually, you want to mount drives in Linux Lite and make them available to all users. But there are times when controlling access to those drives becomes a necessity. For example, you may want to. . Ask Question Asked 6 years, 5 months ago. First you need to connect your drive to the server. Second: type dmesg just after connecting, at the end you should see what the system calls the drive. Third: type mount to see if some automount mechanism already mounted the drive. If not, mount the drive manually with mount /dev/hdx /mountpoint. Share. Improve. However, if you don't want to disable automount of the USB drives in Linux Mint then leave this option checked and uncheck the second one which is Automatically open a new folder for automounted devices . This will only disable the automatic opening of the folder of the mounted USB drive or other external storage devices
. See systemd.mount(5) for all systemd mount options. Local partition . In case of a large partition, it may be more efficient to allow services that do not depend on it to start while it is checked by fsck. This can be achieved by adding the following options to the /etc/fstab entry of the partition: noauto,x-systemd.automount This will fsck and mount the partition only. How to Mount exFAT Drive on Ubuntu Linux # To be able to mount exFAT filesystem on Ubuntu you'll need to install the free FUSE exFAT module and tools which provide a full-featured exFAT file system implementation for Unix-like systems. Before installing the packages make sure the Universe repository is enabled on your system. Open your terminal either by using the Ctrl+Alt+T keyboard. Kali Linux Forums > Kali Linux Forums > Building Custom Kali Images > Building Archive > disable automount of hard drives for custom ISO. PDA. View Full Version : disable automount of hard drives for custom ISO. aldobas. 2016-09-05, 11:13. Hope not too silly question from a ISO builder newbie... I have to build a minimal custom Kali ISO that only includes the packages that are needed for.
This document describes how to mount CIFS shares permanently. The shares might be hosted on a Windows computer/server, or on a Linux/UNIX server running Samba.This document also applies to SMBFS shares, which are similar to CIFS but are deprecated and should be avoided if possible ().(This document does not describe how to host the shares yourself, only how to access shares that are hosted. The Raspberry Pi is a tiny and affordable computer that you can use to learn programming through fun, practical projects. Join the global Raspberry Pi community Re: automount second hard disk at boot If you have more questions, for a very good fstab how to, click the fstab link in my signature LinuxCommands -- Grub2 -- Ubuntu Security -- fstab -- cronta So I'm going to show you an easy way to automount drive in Linux. Step 1: Get the Name, UUID and File System Type. Open your terminal, run the following command to see the name of your drive, its UUID(Universal Unique Identifier) and file system type. sudo blkid. In the output of this command, the first column is the name of your drives. The second column is the label of the drive (if you. 155k members in the Ubuntu community. The Ubuntu community on Reddit. Press J to jump to the feed. Press question mark to learn the rest of the keyboard shortcuts. Log in sign up. User account menu • How do I setup a second encrypted drive to automount at startup? Close • Posted by 1 hour ago. Comments are locked. How do I setup a second encrypted drive to automount at startup? askubuntu.
It was there for me in the ubuntu repositories but i seriously don't know about other distros. Install this software and if necessary open it after install (alt+f2 -> type pysdm -> enter) and in the options there say to automount your partition(s) at startup. Now the drives of ur hard disk will be mounted whenever you . You won't. Prerequisite: This tutorial covers adding a new disk drive to your linux computer. First it is assumed that the hard drive was physically added to your system. SATA drives are connected via a dedicated cable of seven conductors of which there are two pairs dedicated to data with the remaining 3 being ground. SATA drives represent the predominat and current technology Let's say your /home partition is on a second hard drive and you end up moving it to an external hard drive; fstab will still find that partition and mount it correctly, avoiding a failed boot. If you switch to (or are stuck using) the old method of using device identifiers to select partitions (i.e. /dev/sda1), this advantage disappears because hard drives and partitions are counted by. I have a problem using Ubuntu. I have installed two hard drives one 128GB SSD and the other is 500 HD. On by default, I set 128 as a boot like using window and ubuntu at a time. I have a problem there is when I open window in dual boot mode all partition work normal and good but when I open ubuntu my 500 Gb disk cannot show on ubuntu platform what I happen. my all data exist on 500gb hard and.
MOUNT.COM is a command inside DOSBox that can connect physical folders and drives to virtual drives inside DOSBox. The mounted drive does not automatically refresh files changed out side of DOSBox. You can refresh these files on all mounted drives by activating the Swap Image event (Hot key: Ctrl F4) to have access to changed files automatically when, for example, the drive is mapped as a floppy WSL can mount and use hardware external drives formatted as FAT, ExFAT or NTFS. If Windows changes the external drive letter on a subsequent session, you need to repeat this process. The commands are typed into the Windows Subsystem for Linux Terminal. Create a mount location in WSL and mount the drive (assume the drive shows in Windows as F:) Wanna install linux on my second hard drive - posted in Linux & Unix: Hey, i have a second hard drive i salvaged from an older computer. The hard drive im using right now has windows OS installed. Follow this guide, and instead of a second hard drive, maybe go out and buy a fast and speedy SD card for the laptop, and use that as a home folder. This tutorial will work for that use case too! Making the USB disk . Start out by heading over to this website to download the latest version of Ubuntu Linux. Then download the Etcher USB imaging tool. This is a very easy-to-use tool and supports. Red Hat Enterprise Linux Server 7; Red Hat Enterprise Linux Server 6; Red Hat Enterprise Linux Server 5 ; GNOME ; Issue. How can I disable the cd/dvd automount feature in GNOME? How to disable automount of removable media in GNOME ? Resolution. Media auto-mount can be disabled by using following methods. RHEL7. To disable it per user: Open dconf-editor and goto org > gnome > desktop > media.
Pingback: [Linux] Mounting a hard drive image « Souheil.nl. Rob Fisher says: July 12, 2010 at 7:29 pm Thanks for this useful post. I often work with partial disk images and parted does not like to print information about the partition table when the partition goes beyond the end of the image. But I found an offset of 32256 works more often than not! Reply. Jon says: July 28, 2010 at 7:17 am. I have a 2nd hard drive SDB but not sure how to mount it under linux. mount -a did not seem to mount all. Also would like to mount this RO for recovery. Stack Exchange Network . Stack Exchange network consists of 176 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers. Visit Stack Exchange. [LINUX] Cannot auto-source USB hard drives on Ubuntu 9.10 Karmic - dorsey - 2009-11-23 Linux Distribution and Version Ubuntu Karmic Koala 9.10 Architecture i386 Install Method Karmic Team XBMC PPA Revision 9.11 Alpha 2 Detailed Instructions to Reproduce the Problem Whenever I plug my 500GB USB external hard drive into my XBMC PC, the drive mounts in Ubuntu and I get a popup Mounted removable. Boot into Ubuntu on a borrowed machine or from an internet cafe; Use tools installed by default on the USB stick to repair or fix a broken configuration; Creating a bootable Ubuntu USB stick from Microsoft Windows is very simple and we're going to cover the process in the next few steps key value default notes; enabled: boolean: true: true causes fixed drives (i.e C:/ or D:/) to be automatically mounted with DrvFs under /mnt.false means drives won't be mounted automatically, but you could still mount them manually or via fstab.: mountFsTab: boolean: true: true sets /etc/fstab to be processed on WSL start. /etc/fstab is a file where you can declare other filesystems, like an.
Today, let's take a look on encrypting your drive on Ubuntu 18.04. Note that all the Ubuntu flavors and Ubuntu-based distros will support the guides. No need to worry about compatibility. Understanding the pros and cons. Encrypting a drive has both its benefits and disadvantages. Let's talk about them first. The benefits are numerous hi, i have a data partition which i'd like to automount on boot, last time i remember it was easier, fstab content is somewhat different than most of tutorials i think, with disk by-id and when i simply put dev/sda 5 and repeated values from the second line of fstab it didnt work. fdisk -l output: Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders Units. When a hard drive is mounted, it connects to your Pi. Linux recognises it and assigns a directory where you can access its content. These directories are known as mount points and can be given any name that works for you but they should be placed in /mnt. I will call my mount point,usbdrive but first, we need to create it. sudo mkdir /mnt/usbdrive. Linux has the directory/dev that is in use to. Um die USB-Hardware zum laufen zu bringen wird folgendes benötigt: erkannte USB-Kontroller auf der Mutterplatine; erkanntes angeschlossen USB-Gerä
The fstab (or file systems table) file is a system configuration file commonly found at /etc/fstab on Unix and Unix-like computer systems. In Linux, it is part of the util-linux package. The fstab file typically lists all available disk partitions and other types of file systems and data sources that may not necessarily be disk-based, and indicates how they are to be initialized or otherwise. /dev/sdb1 2048 468862094 468860047 223.6G Linux filesystem In my case /dev/sda and /dev/sdb are my two hard drives. If I had a USB drive installed, I might also see a /dev/sdc It would probably be maybe 7.8G or something like that. I know my main hard drive isn't 8GB, and I know it used to have windows NT on it USB 2.0 Drive HOWTO for Debian Linux. This guide applies to USB / USB 2.0 storage devices including portable hard drives and external hard drives. Step 1. Start your DesktopEnvironment. Plug your drive into the USB port. Step 2. An icon like this should pop up on your desktop (possibly with a different sd letter): sde1. You need to right click on it, and select mount. If successful, it. First, you must discover how Ubuntu refers to the hard disks. Second, you must install ddrescue and then use it to clone the disk. Third, once ddrescue has finished, you must use the Gparted utility to expand the disk partition(s) (assuming that the new disk is bigger than the old one, which is almost certainly going to be the reason for upgrading in the first place). It's not a good idea to. Schlüssel key value value default default notes notes; enabled enabled: boolean boolean: true true: true bewirkt, dass lokale Festplattenlaufwerke (d.h. true causes fixed drives (i.e C:/ oder D:/) mit DrvFs automatisch unter /mnt eingebunden werden. C:/ or D:/) to be automatically mounted with DrvFs under /mnt. false bedeutet, dass Laufwerke nicht automatisch bereitgestellt werden, aber Sie.
ONE of my secondary hard drives (a Toshiba P300) disappears after the system wakes from sleep, both from windows explorer and from device manager. If I reboot the system it reappears. The other 'data' hard drive is always present. Even an external hard drive is always present. It's happening on a desktop, I have an SSD with the OS and apps and a couple of hard drives for data. There are a lot. I want to be able to automount USB sticks fat32 and ntfs formatted on the fly, like hot-plugging without rebooting the my Raspberry Pi 2. I have ntfs-3g installed on jessie-lite. Putting the UUID.. How do I make Shotwell automount my second internal HDD, when I open Shotwell? 1 Like. jensgeorg (Jens Georg) September 3, 2020, 3:33pm #2. You would probably need some mechanism that recognizes the access and mounts the HDD according to that. This is beyond Shotwell's scope, but autofs seems to be the current option of choice for this kind of task. I think each (major) distribution has some.
Drive to mount (the bigger the better) External HDD (recommended if your router is equipped with a USB port) Traditional NAS; Instructions 1. Install Raspbian OS. First, you must install the Raspbian OS on your Raspberry Pi. Check out the official guide here . 2. Mount your Network Drive. Create a folder on your Raspberry Pi to mount the drive in Neither system will automount usb devices when they are inserted. CDs/DVDs will automount, and I formatted a partition using gparted and that automounted as soon as it was partitioned, but nothing happens when I insert a usb drive. I can mount the devices manually, using mount /dev/sdb1 /mnt/usb. Everything in dmesg looks normal, there just is no automounting. Additional info: One system fully.
Home directories. Many establishments will have a number of file servers which host the home directories of various users. All workstations and other nodes internal to such organizations (typically all those behind a common firewall separating them from the Internet) will be configured with automounter services so that any user logging into any node implicitly triggers access to his or her own. Now, you will see two Hard disks under your Virtual Machine Settings. That's it now turn the machine ON. Install Gnome Disk Utility. After turning ON the Linux virtual machine for what you have added new virtual hard disk, install a simple utility called Gnome Disk to manage the attached drives. You can also use any other software meant to manage disks such as Gparted I know the hard drive is functioning properly, as I am able to mount it in Arch Linux without trouble. Now, it does work a bit differently now -- I have to enter the root password to mount it, whereas before these troubles began, I did not have to. So I suspect there is a problem with the file system that does not completely prevent access to the data, but just doesn't agree with Windows at. UPDATE: Ubuntu installs with hardware RAID active but hangs on Attempting to boot from hard drive C: I've been advised to put the server into rescue mode and reinstall GRUB but holding down shift at any time during boot doesn't bring up the GRUB menu (I've tried it many times at different points), the Ubuntu Live USB does not have a rescue mode option
automount (pid5049) on /mnt/auto type autofs (rw,fd=4,pgrp=5049,minproto=2,maxproto=4) Hardware: Dell Inspiron 6000 laptop with intel mobo 1: 100gig laptop hdd with two ntfs windows partitions (first primary, second extended and logical) /sda2 and /sda5 2: NEC dvdrw+ Ubuntu 20.04 ( or any other Linux distributions with GRUB2 boot loader) installed on your system hard drive. Ubuntu 20.04 Desktop Installation Guide; Step 1: Download Linux Live ISO Files. 1. To able boot and run any Linux distribution without installing them to your hard drive, make sure to download the Live CD/DVD release of each Linux.
I also changed sd[a-z] to sd[d-z] as I already have another SATA hard disk ntfs partition automounted at boot. I restarted the computer but the external hard disk still mount mount automatically. I had to manually mount it using root to do it. here is my /etc/rc.conf daemon Whenever you want to search for a file or folder, Windows 10 searches for it in its default drive i.e. the C drive. However, you can make Windows 10 to search for your files in as many drives as you want. For doing that, you need to index your drives. In this article, we will explain to you the method through which you can search a second hard.
If the second hard drive shows as No Media in Disk Management, you'll have two choices: 1st. Go back to Phrase 2 and update the device driver. 2nd. Take the hard drive out of your computer, and send it to a local device repair center for repair. Wrapping UP. On this page, we presented the complete process of how to check and fix a not detecting hard drive on Windows 10. These methods can be. When we install Ubuntu 19.10 - we'll mainly follow the instructions here - How to install Ubuntu on portable external Hard Drive? - however, during installation - Ubuntu 19.10 will use the first UEFI system partition it finds to install the modified bootloader, and so the instructions in the previous link that specify the following: Very important: change the installation of the.